Dulux 7L Maxilite Plus White 15245

• Formulated to meet economical needs
• Suitable for interior walls and ceiling
• Matt Finished

Special features:

• Water based

• Comfortable application

Number of coats:

3-4 Coats

Usage Details

Preparing the surfaces:

New or Bare Surfaces: New or bare surfaces must be clean, dry and free from efflorescent salts. Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fibre brush and dust off. Treat any areas affected by mould, lichens, algae and moss with bleach. After priming new surfaces with ICI Paintex Ultraprime, dry over night, fill the surface with ICI Paintex putty. Please refer to PDS of ICI Paintex Ultraprime and ICI Paintex putty for correct application procedure and drying time properties. For best results a single coat of ICI Paintex Ultraprime over wall putty and dry overnight. Previously Painted Surface: Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fibre brush and dust off. Spot prime and fill the surface as describe above if required. Powdery, dusty and cracked surface: Make good minor defects. For larger holes and cracks use sand and cement mixture. Allow the surface to dry. Prime the surface and then fill any surface imperfections with ICI Paintex putty. For best results a single coat of ICI Paintex Ultraprime over wall putty and dry overnight.

Painting:

Apply 3-4 coats of Maxilite and leave for 2-3 hours between coats.

Cleaning:

Clean all equipment with clean water immediately after use

Storing:

Store paint in dry conditions and protect from extreme temperatures.

Recycling:

Do not empty into drains or watercourses. Very toxic to aquatic organisms. Dispose of any paint waste in accordance with the appropriate environment quality regulations

Keeping the look:

Previously Painted Surface: Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fibre brush and dust off. Spot prime and fill the surface as describe above if required. Powdery, dusty and cracked surface: Make good minor defects. For larger holes and cracks use sand and cement mixture. Allow the surface to dry. Prime the surface and then fill any surface imperfections with ICI Paintex putty. For best results a single coat of ICI Paintex Ultraprime over wall putty and dry overnight.

Health and Safety:

Keep out of reach of children. Keep away from sources of ignition. In case of fire use foam, dry powder, AFFF or CO2 fire extinguisher. Never use water. Keep container tightly closed and upright to prevent leakage when not in use. Avoid contact with eyes and skin. When applying paint it is advisable to wear eye protection and gloves. Repeated exposure may cause skin dryness or cracking. In case of contact with eyes rinse immediately with plenty of water keeping eyelids apart and seek medical advice. Remove splashes from skin, use soap and water or a recognized skin cleaner. Work only in areas of good ventilation. When using inside, always keep doors and windows fully open during application and drying. A suitable cartridge mask should be worn when rubbing down. The product is harmful if swallowed; seek medical advice. Dry sanding, flame cutting and or welding of the dry paint film will give rise to dust and or hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. Do not breathe vapour or sanding dust. The product is toxic by inhalation. If inhalation causes physical discomfort, move to fresh air. If discomfort persists or any breathing difficulty occurs, seek medical advice & show container label. Care must be taken when transporting paint. Do not store by hanging on a hook. Protect from extremes of temperature. Store in a cool and dry place. In the event of an accident, collect spillage using sand or earth. Do not empty into drains or watercourses as product is very toxic to aquatic organisms and may cause long term adverse effects in the aquatic environment. Dispose of any paint waste in accordance with the appropriate environment quality regulations. Safety Data Sheet available for professional users on request. The product container is only for paint use.